Astm A234 Wpb Buttweld Fittings Renowned Suppliers In India, Astm A234 Wpb Fittings, Seamless Fittings Suppliers, ASTM A234 WPB Grade Steel Elbow Renowned Exporters in India

Astm A234 Wpb Tee, Astm A234 Wpb Elbow, Astm A 234 Wpb Reducer, Astm A234 Wpb Pipe Cap, Buttweld Fittings

Buttweld Seamless And Welded Astm A234 Wpb Pipe Fittings Exporters In India

Ready Stock Available
ASTM A234 WPB Buttweld Fittings	100 ton

The ASTM A234 specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. The material for fittings shall consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added. Forging or shaping operations may be performed by hammering, pressing, piercing, extruding, upsetting, rolling, bending, fusion welding, machining, or by a combination of two or more of these operations. The forming procedure shall be so applied that it will not produce injurious imperfections in the fittings. Fittings, after forming at an elevated temperature, shall be cooled to a temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. The fittings shall be subjected to tension test, hardness test, and hydrostatic test.

ASTM A234 WPB Pipe Fittings Chemical Composition %

Grade	C	Mn	P	S	Si	Cr	Mo	Ni	Cu	V	Nb
WPB	0.3	0.29-1.06	0.05	0.058	0.1min	0.4	0.15	0.4	0.4	0.08	0.02
WPC	0.35	0.29-1.06	0.05	0.058	0.1min	0.4	0.15	0.4	0.4	0.08	0.02

 

ASTM A234 WPB Buttweld Pipe Fittings Mechanical Properties %

Tensile Requirements	WPB	WPC
Tensile Strength, min, ksi[MPa]	60-85 [415-585]	70-95 [485-655]
Yield Strength, min, ksi[MPa]	32 [240]	40 [275]

 

ASTM A234 WPB Pipe Fittings Production Range

Type	Seamless / Welded / Fabricated
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Range	½”NB to 48″NB in Sch 10s, 40s, 80s, 160s, XXS.
Dimensions	ANSI/ASME B16.9, B16.28, MSS-SP-43.

Buttweld ASTM A234 WPB Pipe Fittings

Seamless/ Welded 100% Radiography Tested

Products		Size
ASTM A234 WPB Elbows – Long Radius	ASTM A234 WPB Stub Ends	Sizes 1/2″ – 48″
ASTM A234 WPB Elbows – Short Radius	ASTM A234 WPB Crosses
ASTM A234 WPB Reducing Elbows	ASTM A234 WPB Reducing Crosses
ASTM A234 WPB 45° Elbows	ASTM A234 WPB 180° LR Return Bends
ASTM A234 WPB Tees	ASTM A234 WPB 180° SR Return Bends
ASTM A234 WPB Reducing Tees	ASTM A234 WPB Pipe Bends / Piggable Bends
ASTM A234 WPB Reducers	ASTM A234 WPB Couplings
ASTM A234 WPB Concentric Reducers	ASTM A234 WPB Pipe Nipples
ASTM A234 WPB Eccentric Reducers	ASTM A234 WPB Forged/Plate Cut Rings
ASTM A234 WPB 3D Elbow	ASTM A234 WPB End Caps
ASTM A234 WPB 5D Elbow	Carbon Steel Forged / Plate Circles

Brands we Stock & Supply of Astm A234 wpb Buttweld Fittings

Authorised Dealer & distributors of
United Seamless Limited -usl	Bao Steel- Bao	Yangzhou Lontrin Steel Tube -lontrin	Sumitomo Metals Smtm	Tenaris -tnrs
Valourec & Mannesman -v&m	Wuxi	Maharastra Seamless Limited -msl	Indian Seamless Metal Tubes Limited _ismt	Jindal Saw Ltd -jsl

We are approved vendor & Suppliers of Astm A234 wpb Buttweld Fittings in GASCO, KNPC, SAUDI ARAMCO, SABIC, ORPIC, NIORDC, PIDMCO etc.

Vendor & Suppliers of
GASCO	KNPC	SAUDI ARAMCO	SABIC	ORPIC	PIDMCO